Create 3D Tracking Area Group

The tracking area is a defined area within the project's coordinate system in which you want to enable tracking. This section will walk you through adding a new 3D tracking area group for your project.

  1. Open the project in the QSP.
  2. In the object tree on the left, find Tracking Area Groups and right click on it.
  3. Select Add Tracking Area Group.
  4. Give the group a descriptive name that will help you identify it later.

  5. In the object info panel that opens on the right, edit the group settings to best suit your project. For a 3D tracking area choose Allow 3D and decide if you want to use Only 3D tracking areas in this tracking area group. For more details about the other settings, please see the Create New Tracking Area Groups section of this guide.
    • Allow 3D - Select to allow 3D tracking for this tracking area group. When allowed, tags in a tag group set to be tracked in 3D, will be tracked in 3D. Tags in tag groups set to be tracked in 2D, will be tracked in 2D.
    • Only 3D - Allow only 3D tracking. In this case, even tags in tag groups set to be tracked in 2D, will be forced to track in 3D.
  6. Now you can add tracking areas to this group. They settings applied here will be applied to any tracking areas added to the tracking area group. For more information, see the Add New Tracking Area section of this guide.