Validate Tracking Using Focusing Locator

Once you have deployed the Locators, you can use the Focusing Locator to test and validate that the location tracking works. To do so, keep the Focusing Locator connected to the Quuppa network and follow the steps below.
  1. In the menu bar at the top, open the Deployment menu and select Show Focusing Locator.
  2. Move the Focusing Locator around the tracking area and monitor the position in the QSP.
    Note: The antenna of the Focusing Locator is directive (contrary to the tag antenna, which is omnidirectional). In order to obtain good location estimates, make sure that the antenna is not pointing away from the nearby Locators.
  3. Once you are done, stop the monitoring by opening the Deployment menu again and selecting Hide Focusing Locator.