Q35 Locator Quick Start Guide

Thank you for purchasing the Quuppa Q35 Locator.

The Q35 is a Generation Q Locator and works with the Quuppa Locator Subscription. The subscription is Locator-specific and needs to be valid to operate the unit. The Quuppa team will generate the subscriptions for you on purchase.

This guide will walk you through the steps needed to set up your new Locator using the following tools:

  • Quuppa Customer Portal (QCP)
  • Quuppa Site Planner (QSP)
  • Quuppa Positioning Engine (QPE)
This guide has been divided into two sections as the process of setting up a project with only Generation Q Locators differs slightly from the process of setting up a mixed system including both Generation Q and LD Generation Locators.
  1. Setting up Generation Q only projects
  2. Setting up mixed projects
Note: Before you start setting up, update your system to the latest software release. Also update the Locator Firmware. To do so, follow these steps:
  • Software - download the latest version from the Downloads section in the QCP. Alternatively, if you are running the system on a Quuppa Development Kit Controller PC, you can use the update software icons available on the desktop.
  • Locator Firmware - connect the Locators to the QPE and follow the instructions in the Upgrade Firmware for All Locators section of our online documentation.

If you have any further questions, or require additional support, please contact Quuppa Support at support@quuppa.com.